In this instructional video we’ll assemble
the benches of the 44 inch round picnic table from Lifetime products. Turn a bench leg upside
down and press a foot cap onto each end. Secure each foot cap with two screws and repeat this
step for the two remaining bench legs. Turn the bench frame upside down and attach the
legs to the frame. Note, pay attention to the orientation of the legs in relation to
the frame. And repeat the last step for all three bench frames. Place a bench top upside
down on a flat surface and attach the frame to the bench top using six screws. Repeat
the last step for the remaining two bench tops. Turn the tabletop upright and insert
a small bench leg into a leg attached to the tabletop. And repeat the last step for the
remaining two bench tops. Finally, insert a cotter key through the slits on the leg
to hold the small bench leg in place. Repeat this last step for the remaining two legs.
Note, if you plan on using an umbrella or parasol remove the cap from the center of
the table and insert the umbrella or parasol through the hole. You should also use a base
to keep the umbrella or parasol in place.